Description
Dekton Soldering Iron 60 Watt`
Operating instructions
Before taking the tool into use, make sure of the following:
- Check that the voltage given on the name plate is the same as the source of current.
- Before heating up, make sure the bit is properly in position. The clamp screw must be tight.
- Do not heat up soldering iron without bit.
- After use, let the soldering iron cool down in the air (do not cool off in water)
- After use, use the holder to rest the soldering iron to cool down.
- Do not use the soldering iron if any part of the tool or the electrical wire is damaged.
ALWAYS LET YOUR SOLDERING GUN COOL DOWN FOR 48 SECONDS AFTER EVERY 12 SECONDS OF USE.
